- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
Views: 222 Author: Tina Publish Time: 2025-04-21 Origin: Site
Content Menu
>> Why Replace the LCD Display on a Dash Cam?
● Step-by-Step Guide to Replacing the LCD Display on a Dash Cam
>> 1. Prepare Your Workspace and Device
>> 2. Remove the Dash Cam Housing Screws
>> 3. Disconnect the LCD Screen Carefully
>> 4. Remove the Faulty LCD Screen
>> 5. Install the New LCD Screen
● Tips for a Successful LCD Replacement
● Common Issues and Troubleshooting
● Frequently Asked Questions (FAQs)
>> 1. How do I know if my dash cam's LCD screen needs replacement?
>> 2. Can I replace the LCD screen myself without professional help?
>> 3. Where can I buy a replacement LCD screen for my dash cam?
>> 4. What precautions should I take during the replacement?
>> 5. What if my dash cam doesn't turn on after replacing the screen?
Replacing the LCD display on a dash cam can seem daunting, but with the right tools, careful steps, and patience, it is a manageable DIY project. This guide will walk you through the process of replacing the LCD screen on a dash cam, including preparation, disassembly, screen replacement, and reassembly. We will also cover tips, common issues, and answer frequently asked questions to ensure your dash cam is up and running with a crisp new display.
The LCD display on a dash cam is crucial as it allows you to view recordings, adjust settings, and monitor the camera live. Over time, the screen can get damaged due to impacts, heat, or manufacturing defects, leading to:
- Cracked or shattered screen
- No display or flickering image
- Unresponsive touch screen (if applicable)
- Poor visibility or dead pixels
Replacing the LCD display extends the life of your dash cam and saves the cost of buying a new device.
Before starting, gather the following tools and materials:
- Precision screwdriver set (Phillips #00 or similar)
- Plastic pry tools or spudgers
- Tweezers
- Replacement LCD screen compatible with your dash cam model
- Soldering iron (may be required for some models)
- Electrical tape or insulating material
- Clean workspace with good lighting
- Anti-static wrist strap (optional but recommended)
- Park your vehicle on a flat surface and remove the dash cam from the car.
- Power off the dash cam and disconnect any power sources.
- Work on a clean, static-free surface to avoid damaging electronic components.
Most dash cams have screws securing the housing, usually located at the corners or under rubber pads.
- Use the appropriate screwdriver to remove all visible screws.
- Keep screws organized as you will need them for reassembly.
- Gently pry open the housing using plastic pry tools to avoid scratching or breaking the casing.
- Once the housing is open, locate the LCD screen and its connecting ribbon cable.
- Gently disconnect the ribbon cable from the motherboard or connector. Ribbon cables are delicate; use tweezers or a plastic tool to lift the connector latch before pulling the cable out.
- If your dash cam model requires, you may need to remove additional screws or components to free the screen.
- Carefully lift the LCD screen out of its frame.
- Avoid bending or applying pressure to the screen or other components.
- Note the orientation and placement for installing the new screen.
- Position the new LCD screen in the same orientation as the old one.
- Reconnect the ribbon cable firmly but gently.
- If soldering is required (some models), carefully solder the connections, ensuring no cold joints or shorts.
- Once the new screen is installed and connected, close the housing carefully.
- Replace all screws removed earlier, ensuring the housing is tightly secured.
- Double-check that no cables are pinched or loose.
- Power on the dash cam to verify the new screen works correctly.
- Check for display clarity, touch responsiveness (if applicable), and proper function of all buttons.
- Always use the correct screwdriver size to avoid stripping screws.
- Handle ribbon cables with extreme care to prevent tears.
- Work slowly and methodically to avoid damaging internal components.
- If unsure about soldering, seek professional help or practice on spare parts.
- Dispose of old LCD screens responsibly at certified e-waste recyclers[1].
- Screen does not power on after replacement: Check all cable connections and ensure the battery or power source is functioning[3].
- Screen flickering or unstable image: Verify that the ribbon cable is securely connected and not damaged.
- Touchscreen unresponsive: Remove any protective films and recalibrate if the device supports it.
- Device not turning on: Inspect for short circuits or damaged components on the motherboard[3].
- Battery drains quickly: Ensure the new screen is compatible and that power connections are correct.
Replacing the LCD display on your dash cam is a practical way to restore its functionality and extend its lifespan. By carefully following the steps outlined—disassembling the device, removing the faulty screen, installing the new one, and reassembling—you can successfully perform this repair at home. Always prioritize safety by disconnecting power sources and handling components gently. With patience and the right tools, your dash cam will be back to displaying clear footage in no time.
If your dash cam screen is cracked, shows no image, flickers, or is unresponsive to touch, it likely needs replacement[1][2].
Yes, if you have basic technical skills, the right tools, and follow a detailed guide, you can replace the screen yourself. However, soldering skills may be required for some models[2].
Replacement screens can be found through the manufacturer, specialized electronics parts suppliers, or salvaged from similar defective devices[3].
Disconnect all power sources, use anti-static measures, handle ribbon cables carefully, and keep track of all screws and parts[1][4].
Double-check all connections, ensure the battery is charged, and inspect for any damage to the motherboard or cables. Sometimes, a poorly connected LCD cable can cause issues[3].
[1] https://www.ifixit.com/Guide/TOGUARD+C310+Dual+Dash+Cam+Screen+Replacement/179994
[2] https://www.ifixit.com/Guide/Rexing+V1P+Plus+Screen+Replacement/159924
[3] https://jestineyong.com/car-dashboard-camera-repair/
[4] https://www.reshine-display.com/how-to-install-lcd-screen-in-car.html
[5] https://www.youtube.com/watch?v=YOnpbIbJlSs
[6] https://www.youtube.com/watch?v=2-LUzUsJMN4
[7] https://digital-photography-school.com/how-to-replace-a-digital-cameras-lcd-a-walkthrough/
[8] https://www.ifixit.com/Guide/Garmin+Dash+Cam+20+Screen+Replacement/75197
[9] https://www.youtube.com/watch?v=ijNQqKBQwt0
[10] https://nextbase.com/dash-cams/
[11] https://www.blackboxmycar.com/pages/dash-cam-tear-down
[12] https://support.thinkware.com/hc/en-us/articles/360036472913-How-to-Install-a-Dash-Cam
[13] https://www.youtube.com/watch?v=0xYP4hQrcFU
[14] https://www.youtube.com/watch?v=FvoHGvNDC_E
[15] https://www.shutterstock.com/search/dash-cam-installation
[16] https://www.edn.com/aukey-dash-cam-teardown-redux-this-time-the-dra5-gets-a-look/
[17] https://www.youtube.com/watch?v=XvhaZxD8B_k
[18] https://cansonic.com/blogs/news/7-easy-steps-to-install-a-dash-cam-yourself
[19] https://www.handyrecovery.com/repair-corrupted-dashcam-videos/
[20] https://www.reddit.com/r/Dashcam/comments/1cn391x/why_does_it_seem_like_all_the_reccomended/
